Zinc Galvanizing Spray

4S Zinc Galvanizing Spray is a highly effective Zinc-rich touch-up spray offered by Samraj Polytex Ltd. that provides cold galvanizing coating to protect any metal surface from rust & corrosion. It is a convenient smooth flowing spray that stops rust & corrosion on any ferrous or non-ferrous metal surface. It sprays Zinc-rich coating which electro-chemically bonds with metal. And forms highly adhesive, fast drying & permanent primer layer on metal surface to prevent it from rust & corrosion indoors & outdoors.
4S Zinc Galvanizing Spray can also be used as primer over rusted metal to repair hot dip galvanizing or galvanized surfaces damaged due to cutting, drilling & welding. It is specially formulated by advanced technology to provide a tough & durable zinc coating that will not crack or peel-off even in extreme cold or hot conditions.

Features of 4S Zinc Galvanizing Spray:

  • Colour = Silver
  • Zinc Percentage = 46 %
  • Spraying Area = 1.5 m2
  • Dry Film Thickness = 40 μm
  • Drying Time = 20~30 min
  • Durability = 3 years
  • Environmental Safety = No CFCs (Ozone Friendly)


anti rust zinc coating spray

Uses of 4S Zinc Spray :

  • Used as cold galvanization paint for metal surfaces.
  • Used to repair damaged galvanized surfaces or steel structures.
  • Allows deposition of metallic zinc coating which protects metal surface from rust and corrosion.
  • Used as protective paint on iron, steel, woodwork, roof coverings, piping, galvanized sheet iron, etc.
  • Used as water-resistant on marine equipment & off shore steel structures to prevent them from corrosion.
  • Used on telecommunication towers to prevent rusting from rain.
  • Used on cable trays, galvanized gratings, steel pipes and tubes, etc.
  • Used widely in power plant and sub-station equipment etc.
  • Used as primer on galvanized ducts, fences, gutters, trucks, trailers, etc.
  • Used on automobile, car, bike, etc. underbodies and parts to enhance their life.


zinc galvanizing spray

Directions of Usage :

  • Shake well before use. Shake the can vigorously for 1–2 minutes so the mixing balls in the can begins to rattle & mix the paint.
  • Spray through the nozzle of can with a distance of 15–30 cm.
  • Shake often during use & keep the can in motion while spraying.
  • For best result apply thin even film.
  • Check on small area of the part before final use.
  • Use in well ventilated condition.
  • Put the cap after usage of 4S Zinc Galvanizing Spray.
Location: 359, Press St, Narain Market, Sadar Bazaar, Delhi, 110006, India

Comments

Post a Comment

Popular posts from this blog

Electrical Contact Cleaner

Image
4S  Contact Cleaner  is a unique, plastic safe, scientifically formulated, technically proven, non-corrosive product offered by  Samraj Polytex Ltd.  for removing dirt, oil, moisture, flux residue or condensation from sensitive electronics or electrical equipment. 4S is formulated by residue-free, quick drying technology safe to use on metal, rubber & plastic. It is designed with industrial strength quality & extension tube technology that allows to clean the most sensitive components with pinpoint accuracy. 4S  Electrical Contact Cleaner  is a high purity contact cleaner that removes environmental contaminants to protect the electrical contacts from corrosion & frictional wear. It restores the electrical continuity of electrical and electronic contacts by removing dust, oil, grease or carbon residues from the contact surfaces. Resulting, full circuit continuity improves the performance and life of the equipment. Applications of  4S Contact Cleaner : It can be saf
Read more

4S Multi-Purpose SP-40 Spray

Image
4S Multi-Purpose SP-40 is a multi-use aerosol spray offered by Samraj Polytex Ltd. which protects metal from rust & corrosion, lubricates, displaces moisture and penetrate stucking parts. It also removes grease & dust and cleans most of the surfaces. SP-40 Multi-Use Spray solves your DIY problems on the job instantly at home, garage or garden. It stops pitchy sound created by moving parts, free jams, stops rusting, cleans the surface & protect from moisture, all with just one product. 4S Multi-Purpose SP-40 lubricant spray is like “toolkit in a can” with Hundreds of uses. This lubricating spray can be used on alloy wheels, bikes, engines, hinges, hedge trimmers and nuts & bolts. It is safe to use on rubber, wood, metal and most plastics. You can use SP-40 lubricant spray on your car or bike to prevent the parts from rust and corrosion, to prevent sticking of mud or dust at the bottom, and to clean & lubricate the chain . Fun
Read more